Factory-direct since 1999 Human Hair Industry Park, Ligezhuang, Jiaozhou, Qingdao, ChinaWholesale enquiries: +86 152 7524 9803
Request price list
October 27, 2026

What a factory visit should prove — and what to ask for if you cannot go

A tour shows you the room, not the system. Four things are worth checking on the floor, and all four can be requested remotely if you know what to ask for.

The room is not the system

A factory visit is usually a walk through clean rooms with people working in them. It tells you the place exists, which is worth confirming, and it tells you very little about whether your order will be right six months from now.

What you are actually checking is a system: who decides a piece passes, what happens to one that does not, and whether your specification can survive the trip from the sales office to the bench and back to the carton.

Four things answer that. All four are visible in person and all four can be evidenced remotely.

One: where the hair is sorted

Sorting is the stage that decides quality and the stage most factories keep out of sight, because it is dusty, slow and unglamorous.

What to look for: whether raw material is kept separate by origin and length, whether it is weighed and recorded at intake, and whether there is a written record linking a bundle to an order.

The question to ask: if I asked you to show me the bundle for my order, could you? A factory with batch records can. A factory that buys pre-sorted bundles from a market cannot, and will explain why — which is also useful information.

Two: the ventilating benches

Knotting sets the price of a piece, so this is where the cost of a sheitel is decided.

What to look for: whether one person completes a piece or the work passes between benches, how knots are checked, and whether there is a sample of the approved hairline taped up at the bench for reference.

The question to ask: what does the person at this bench compare against? If the answer is “experience”, the hairline will vary by bench. If the answer is a photographed reference for this order, it will not.

Three: the QC station

Every factory says it inspects. The useful question is what happens after an inspection fails.

What to look for: a station with light, a tape measure, a colour ring and a written sheet; and a route out of the room for a rejected piece — back to the bench, or to a repair pile that is worked rather than abandoned.

The question to ask: show me a piece that failed this week and tell me where it is now. This is the single most revealing question on a visit. A factory that can answer it has a system. A factory that cannot has a ceremony.

Four: packing and paperwork

The last twenty minutes of the process decide whether your staff can receive the shipment in an afternoon or a week.

What to look for: whether the specification sheet is printed and packed with the piece, whether cartons are marked with model, colour, length and cap, and whether anything is written by hand at the last minute.

The question to ask: open a finished carton and show me what a client receives. If the sheet inside does not match the piece in the box, nothing earlier in the visit matters.

If you cannot travel

Distance is a real constraint and a visit is not the only way to see a system. Ask for these five things instead, in this order.

A live video walkthrough, scheduled, not a highlight reel. Ask to see the sorting room and the QC bench, and ask the person holding the phone to walk to the bench that is making your order. A recorded promotional video is not evidence; a live call where you choose the direction is closer.

The same room twice. Ask for a short video today and again in three months. Rooms change; systems change more slowly. If the second video shows a different bench arrangement and a different explanation, you have learned something.

Three batches, not one. Order the same model three times across a year and test each arrival with the same checklist. Consistency is the only thing a factory cannot fake over time.

One failure, documented. Ask for a photograph of a rejected piece with the reason written on its sheet. Factories that inspect have these; factories that do not, do not.

Two references you can call. Not the two happiest clients — ask for a client who had a problem and stayed. How a supplier behaves after a fault is the only prediction that matters.

Red flags, in order

A visit that cannot see the sorting room. A QC bench with no written sheet. A rejected piece with no route back to a bench. A specification that is retyped rather than retrieved. A factory that cannot name the person who signs off a shipment.

None of these is fatal on its own. Three of them together describe a supplier who will be difficult to hold to a specification, and that difficulty will show up in your returns column rather than in a meeting.

More in this series

This is one of ten notes on buying sheitels wholesale, written for buyers who have to defend the decision later. The three below pick up where this one stops.